Quality in the details.

The in-house testing laboratory participates in the production process before oil blending begins. During incoming inspection, the components' certified properties are compared with actual measurements. This helps identify deviations before raw materials enter production.

According to the company's description, each batch is checked twice against the control parameters. If the result is satisfactory, the sample undergoes a full analysis. The specific set of parameters depends on the product and its technical documentation.

The third stage is certification of the finished product. A quality certificate is issued for each production batch. This should be distinguished from the general technical data sheet for the range: the certificate relates to a specific batch, while the data sheet describes the product’s purpose and declared properties.

In the published report, the laboratory manager describes checking trial formulations and testing samples of new products. The laboratory supports both routine production and the preparation of trial samples.

For more extensive product testing, the company sends samples to the external specialist centre MITs GSM. This is stated in the company’s materials; the existence of this procedure does not mean that a separate external test report has been published for every product.

The company section includes an image of the laboratory measurement capability assessment. Ask the manufacturer for the current status of documents and certificates. Only available, verified materials are published on the website; a missing public file is not replaced with a fabricated document.