Diesel Force Ultra DPF SAE 10W-40

Name: Forsage Lubricants Diesel Force Ultra DPF SAE 10W-40
Brand: Forsage
SKU: FL-DIESEL-FORCE-ULTRA-DPF-10W-40-20L

Intended for diesel engines in long-haul, road construction and other machinery, as well as buses.

More about application

Compatible with exhaust gas recirculation (EGR), diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems. May be used in gas engines running on compressed natural gas, CNG (methane).

10W-4020 l205 l

Buy in the online shop Product advice

SKU: FL-DIESEL-FORCE-ULTRA-DPF-10W-40-20L

Tests and documents for this product

Technical properties

SAE viscosity	10W-40
Base oil type	Synthetic
Kinematic viscosity at 100 °C	12.5–16.3 mm²/s
Viscosity index	at least 130
Flash point	not below 210 °C
Pour point	no higher than -30 °C
Base number	at least 8.0 mg KOH/g
Sulphated ash	no more than 1.0 %
Water content by mass	traces only
Mechanical impurities by mass	no more than 0.015 %
Foaming tendency / foam stability	no more than 10/0, 20/0, 10/0 cm³

Specifications and performance levels

API CI-4API CI-4/SLCI-4CI-4/SLSLACEA E6

All specifications and compliance claims

ACEA E7MB 228.51MAN M 3477Volvo VDS-3Cummins CES 20078Renault RLD-2Mack EO-NDeutz DQC-IVMTU Category 3.1Scania LA

Compliance information is based on manufacturer data. When selecting a product, consider the equipment manufacturer's requirements.

Documentation

Technical data sheet

Download PDF ↓

Compare with another oil ↗

Testing and experience in service

Articles relating to this specific product: operating conditions, results and original documents.

Laboratory quality controlSeptember 2025 — April 2026

DAF 105.460: two monitoring cycles

Monitoring Diesel Force Ultra DPF 10W-40 in a DAF tractor unit: a fresh sample and analyses after operation.

Conditions and results

Supporting documents · 3

Trial report

Download PDF ↓

Test report No. 845599 · 09.09.2025

Download PDF ↓

Test report No. 845616 · 20.04.2026

Download PDF ↓

Laboratory observations for each test report

Test report No. 845599 · 09.09.2025

The measured parameters are typical of the stated oil type. For a more precise assessment and interpretation of the results, comparative tests are needed using a product of the same name and guaranteed quality, or the full list of requirements for the lubricant or its quality certificate.

Test report No. 845616 · 20.04.2026

Oxidation is elevated. The other oil parameters are within normal limits. Monitor changes in oxidation during continued use. Repeat testing after a short period of operation is recommended.

SKUs and pack sizes

20 l	FL-DIESEL-FORCE-ULTRA-DPF-10W-40-20L
205 l	FORSAGE-DIESEL-FORCE-ULTRA-DPF-SAE-10W-40-205L

Information checked on 30 October 2026 · View in online shop ↗

IN THIS CATEGORY

Search the website

Diesel Force Ultra DPF SAE 10W-40

Technical properties

Specifications and performance levels

Documentation

Testing and experience in service

DAF 105.460: two monitoring cycles

Test report No. 845599 · 09.09.2025

Test report No. 845616 · 20.04.2026

Document

IN THIS CATEGORY

M-8V

M-10G2k

M-14V2

Privacy settings