Photograph on request
Motor Force 2T
Intended for motorcycles, chainsaws, cultivators and other equipment with two-stroke petrol engines, including UAV engines.
More about application
Used mixed with petrol at a ratio of 1:50; follow the engine manufacturer’s recommendations if a higher oil concentration is required.
1 l
SKU: FL-MOTOR-FORCE-2T-1L
Technical properties
| Base oil type | Mineral |
| Kinematic viscosity at 100 °C | 7.0–10.0 mm²/s |
| Viscosity index | at least 95 |
| Flash point | not below 200 °C |
| Pour point | no higher than -25 °C |
| Base number | at least 0.8 mg KOH/g |
| Sulphated ash | no more than 0.20 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.015 % |
| Appearance | homogeneous, clear red liquid without foreign inclusions |
Specifications and performance levels
API TCJASO FCAPI TC, JASO FCTC
Compliance information is based on manufacturer data. When selecting a product, consider the equipment manufacturer's requirements.
Documentation
Technical data sheet
SKUs and pack sizes
| 1 l | FL-MOTOR-FORCE-2T-1L |
Information checked on 30 October 2026 · View in online shop ↗
