Industrial oils
Compressor VDL
Choose the viscosity and specification for your equipment.
Compressor VDL 46
Intended for lubricating compressors manufactured in Russia and abroad, operating in various industrial sectors.
More about application
Lower-viscosity products are mainly used in lubrication systems for screw and rotary compressors, while higher-viscosity products are used in various types of reciprocating compressors.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 46 |
| Kinematic viscosity at 40 °C | 41.4–50.6 mm²/s |
| Flash point | not below 200 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 0.5 mg KOH/g |
| Ash content | no more than 0.04 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Compressor VDL 100
Intended for lubricating compressors manufactured in Russia and abroad, operating in various industrial sectors.
More about application
Lower-viscosity products are mainly used in lubrication systems for screw and rotary compressors, while higher-viscosity products are used in various types of reciprocating compressors.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 100 |
| Kinematic viscosity at 40 °C | 90–110 mm²/s |
| Flash point | not below 220 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 0.5 mg KOH/g |
| Ash content | no more than 0.04 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Compressor VDL 150
Intended for lubricating compressors manufactured in Russia and abroad, operating in various industrial sectors.
More about application
Lower-viscosity products are mainly used in lubrication systems for screw and rotary compressors, while higher-viscosity products are used in various types of reciprocating compressors.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 150 |
| Kinematic viscosity at 40 °C | 135–165 mm²/s |
| Flash point | not below 230 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 0.5 mg KOH/g |
| Ash content | no more than 0.04 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.