Commercial vehicles
Diesel Force Truck
Choose the viscosity and specification for your equipment.
Diesel Force Truck SAE 10W-30
Intended for high-output diesel engines in long-haul tractor units, road vehicles, intercity buses and other equipment.
More about application
Compatible with exhaust gas recirculation (EGR) and/or selective catalytic reduction (SCR) systems, and suitable for use with diesel particulate filters (DPF).
Specifications and performance levels
All specifications and compliance claims
Technical properties
| SAE viscosity | 10W-30 |
| Base oil type | Synthetic |
| Kinematic viscosity at 100 °C | 10.5–12.3 mm²/s |
| Viscosity index | at least 140 |
| Flash point | not below 230 °C |
| Open-cup flash point | 230 °C |
| Pour point | no higher than -35 °C |
| Base number | at least 8.0 mg KOH/g |
| Sulphated ash | no more than 1.0 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.015 % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Diesel Force Truck SAE 10W-40
Intended for high-output diesel engines in long-haul tractor units, road vehicles, intercity buses and other equipment.
More about application
Compatible with exhaust gas recirculation (EGR) and/or selective catalytic reduction (SCR) systems, and suitable for use with diesel particulate filters (DPF).
Specifications and performance levels
All specifications and compliance claims
Technical properties
| SAE viscosity | 10W-40 |
| Base oil type | Synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 150 |
| Flash point | not below 230 °C |
| Open-cup flash point | 230 °C |
| Pour point | no higher than -35 °C |
| Base number | at least 8.0 mg KOH/g |
| Sulphated ash | no more than 1.0 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.015 % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.