Industrial oils
Hydraulic Force HLP
Choose the viscosity and specification for your equipment.
Hydraulic Force HLP 22
These oils are intended for hydraulic systems in various types of industrial equipment of all model years operating under high mechanical and thermal loads, equipped with servo-hydraulic devices, proportional control systems and filter elements with a filtration rating of 3–5 micrometres.
Specifications and performance levels
Technical properties
| ISO VG viscosity grade | ISO VG 22 |
| Kinematic viscosity at 40 °C | 19.8–24.2 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 190 °C |
| Pour point | no higher than -30 °C |
| Acid number | no higher than 1.2 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.03 % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Hydraulic Force HLP 32
These oils are intended for hydraulic systems in various types of industrial equipment of all model years operating under high mechanical and thermal loads, equipped with servo-hydraulic devices, proportional control systems and filter elements with a filtration rating of 3–5 micrometres.
Specifications and performance levels
Technical properties
| ISO VG viscosity grade | ISO VG 32 |
| Kinematic viscosity at 40 °C | 28.8–35.2 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 190 °C |
| Pour point | no higher than -20 °C |
| Acid number | no higher than 1.2 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.03 % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Hydraulic Force HLP 46
These oils are intended for hydraulic systems in various types of industrial equipment of all model years operating under high mechanical and thermal loads, equipped with servo-hydraulic devices, proportional control systems and filter elements with a filtration rating of 3–5 micrometres.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 46 |
| Kinematic viscosity at 40 °C | 41.4–50.6 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 200 °C |
| Pour point | no higher than -20 °C |
| Acid number | no higher than 1.2 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.03 % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Hydraulic Force HLP 68
These oils are intended for hydraulic systems in various types of industrial equipment of all model years operating under high mechanical and thermal loads, equipped with servo-hydraulic devices, proportional control systems and filter elements with a filtration rating of 3–5 micrometres.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 68 |
| Kinematic viscosity at 40 °C | 61.2–74.8 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 205 °C |
| Pour point | no higher than -20 °C |
| Acid number | no higher than 1.2 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.03 % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.