Industrial oils
Industrial I-A
Choose the viscosity and specification for your equipment.
I-8A
Documents for the selected variant
A public PDF for this variant has not yet been posted. Request document ↗
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
I-20A
Mineral industrial oils without additives
Technical properties
| Base oil type | Mineral |
| Kinematic viscosity at 40 °C | 25.0 – 35.0 mm²/s |
| Flash point | 180 °C |
| Pour point | -15 °C |
| Acid number | 0.03 mg KOH/g |
| Sulphated ash | 0.005 % |
| Water content by mass | traces, % |
| Mechanical impurities by mass | absent, % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
I-30A
Documents for the selected variant
A public PDF for this variant has not yet been posted. Request document ↗
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
I-40A
Mineral industrial oils without additives
Technical properties
| Base oil type | Mineral |
| Kinematic viscosity at 40 °C | 51.0 – 75.0 mm²/s |
| Flash point | 220 °C |
| Pour point | -15 °C |
| Acid number | 0.05 mg KOH/g |
| Sulphated ash | 0.005 % |
| Water content by mass | traces, % |
| Mechanical impurities by mass | absent, % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
I-40A TU
A refined distillate industrial oil without additives, intended for machinery and industrial equipment mechanisms whose operating conditions place no special demands on the oil's oxidation resistance or corrosion protection.
Documents for the selected variant
A public PDF for this variant has not yet been posted. Request document ↗
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
I-50A
Mineral industrial oils without additives
Technical properties
| Kinematic viscosity at 40 °C | 90.0 – 110.0 mm²/s |
| Flash point | 225 °C |
| Pour point | -15 °C |
| Acid number | 0.05 mg KOH/g |
| Sulphated ash | 0.005 % |
| Water content by mass | traces, % |
| Mechanical impurities by mass | absent, % |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.