Passenger vehicles
Motor Force Standard
Choose the viscosity and specification for your equipment.
Motor Force Standard SAE 10W-40
These oils are intended for petrol and diesel engines in passenger cars and light commercial vehicles where API SG/CD or earlier performance categories are required.
More about application
Made from high-quality mineral and synthetic base oils using modern additive packages.
Specifications and performance levels
Technical properties
| SAE viscosity | 10W-40 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 110 |
| Flash point | not below 220 °C |
| Pour point | no higher than -28 °C |
| Base number | at least 6.0 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Motor Force Standard SAE 15W-40
These oils are intended for petrol and diesel engines in passenger cars and light commercial vehicles where API SG/CD or earlier performance categories are required.
More about application
Made from high-quality mineral and synthetic base oils using modern additive packages.
Specifications and performance levels
Technical properties
| SAE viscosity | 15W-40 |
| Base oil type | Mineral |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 100 |
| Flash point | not below 210 °C |
| Pour point | no higher than -25 °C |
| Base number | at least 6.0 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Motor Force Standard SAE 20W-50
These oils are intended for petrol and diesel engines in passenger cars and light commercial vehicles where API SG/CD or earlier performance categories are required.
More about application
Made from high-quality mineral and synthetic base oils using modern additive packages.
Specifications and performance levels
Technical properties
| SAE viscosity | 20W-50 |
| Base oil type | Mineral |
| Kinematic viscosity at 100 °C | 16.3–21.9 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 215 °C |
| Pour point | no higher than -20 °C |
| Base number | at least 6.0 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.