Motor Force Supreme

Motor Force Supreme SAE 0W-20

Modern synthetic engine oil for petrol and diesel engines.

More about application

Intended for use with exhaust emissions control systems including DPF (diesel particulate filters) and TWC (three-way catalytic converters). The oils are developed with the requirements of leading equipment manufacturers in mind. They are made from highly refined synthetic base oils using advanced Mid-SAPS additive packages.

Viscosity0W-20

Pack sizes1 l · 4 l · 20 l · 175 kg

Buy in the online shop Full product page

Specifications and performance levels

API SPAPI SP-RCILSAC GF-6aGM Dexos 1 Gen 2

Technical properties

SAE viscosity	0W-20
Kinematic viscosity at 100 °C	6.9–9.3 mm²/s
Viscosity index	at least 160
Flash point	not below 210 °C
Pour point	no higher than -40 °C
Base number	at least 6.5 mg KOH/g
Sulphated ash	no more than 1.0 %
Foaming tendency / foam stability	no more than 10/0, 50/0, 10/0 cm³

Documents for the selected variant

Technical data sheetDownload ↓

Compare with another oil ↗

Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.

Motor Force Supreme C2/C3 SAE 5W-30

Modern synthetic engine oil for petrol and diesel engines.

More about application

Intended for use with exhaust emissions control systems including DPF (diesel particulate filters) and TWC (three-way catalytic converters). The oils are developed with the requirements of leading equipment manufacturers in mind. They are made from highly refined synthetic base oils using advanced Mid-SAPS additive packages.

Viscosity5W-30

Pack sizes1 l · 4 l · 175 kg · 5 l · 20 l

Buy in the online shop Full product page

Testing and experience in service

Specifications and performance levels

API SP/CFACEA C2ACEA C3C2C2, C3C3

All specifications and compliance claims

CFSPSP/CFMB 229.51MB 229.31VW 504.00/507.00BMW LL-04GM Dexos 2Porsche C30

Technical properties

SAE viscosity	5W-30
Base oil type	Synthetic
Kinematic viscosity at 100 °C	9.3–12.5 mm²/s
Viscosity index	at least 160
Flash point	not below 215 °C
Pour point	no higher than -37 °C
Base number	at least 6.0 mg KOH/g
Sulphated ash	no more than 0.8 %
Foaming tendency / foam stability	no more than 10/0, 50/0, 10/0 cm³
NOACK evaporation loss	no higher than 12 %
Apparent (dynamic) viscosity at 150 °C (HTHS)	no more than 3.5 mPa·s

Documents for the selected variant

Technical data sheetDownload ↓

Testing and experience in service

Articles relating to this specific product: operating conditions, results and original documents.

Laboratory quality controlDecember 2023–August 2024

Hyundai Elantra: three sampling points

Monitoring Motor Force Supreme C2/C3 SAE 5W-30 in a Hyundai Elantra.

Conditions and results

Supporting documents · 3

Test report No. 712738 · 11.12.2023

Download PDF ↓

Test report No. 727564 · 12.02.2024

Download PDF ↓

Test report No. 555279 · 13.08.2024

Download PDF ↓

Laboratory observations for each test report

Test report No. 712738 · 11.12.2023

Comparison with fresh oil is needed for a more precise interpretation of additive package composition and base number. The other oil parameters are within normal limits. A fresh oil sample is recommended.

Test report No. 727564 · 12.02.2024

Comparison with fresh oil is needed for a more precise interpretation of additive package composition and base number. The other oil parameters are within normal limits. A fresh oil sample is recommended.

Test report No. 555279 · 13.08.2024

Comparison with fresh oil is needed for a more precise interpretation of additive package composition and base number. At the time of the oil change, the other measured parameters had not reached their limit values.

Compare with another oil ↗

Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.

Motor Force Supreme C3 SAE 5W-40

Modern synthetic engine oil for petrol and diesel engines.

More about application

Intended for use with exhaust emissions control systems including DPF (diesel particulate filters) and TWC (three-way catalytic converters). The oils are developed with the requirements of leading equipment manufacturers in mind. They are made from highly refined synthetic base oils using advanced Mid-SAPS additive packages.

Viscosity5W-40

Pack sizes1 l · 4 l · 20 l · 175 kg

Buy in the online shop Full product page

Specifications and performance levels

API SP/CFACEA C3C3CFSPSP/CF

All specifications and compliance claims

MB 229.51MB 229.31VW 505.00/505.01BMW LL-04GM Dexos 2Porsche A40Renault RN 0700/0710

Technical properties

SAE viscosity	5W-40
Base oil type	Synthetic
Kinematic viscosity at 100 °C	12.5–16.3 mm²/s
Viscosity index	at least 165
Flash point	not below 220 °C
Pour point	no higher than -35 °C
Base number	at least 6.0 mg KOH/g
Sulphated ash	no more than 0.8 %
Foaming tendency / foam stability	no more than 10/0, 50/0, 10/0 cm³
NOACK evaporation loss	no higher than 11 %
Apparent (dynamic) viscosity at 150 °C (HTHS)	at least 3.5 mPa·s

Documents for the selected variant

Technical data sheetDownload ↓

Compare with another oil ↗

Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.

Search the website

Motor Force Supreme SAE 0W-20

Specifications and performance levels

Documents for the selected variant

Motor Force Supreme C2/C3 SAE 5W-30

Specifications and performance levels

Documents for the selected variant

Testing and experience in service

Hyundai Elantra: three sampling points

Test report No. 712738 · 11.12.2023

Test report No. 727564 · 12.02.2024

Test report No. 555279 · 13.08.2024

Motor Force Supreme C3 SAE 5W-40

Specifications and performance levels

Documents for the selected variant

Document

Privacy settings