Industrial oils
Slip Way
Choose the viscosity and specification for your equipment.
Packaging photograph on request
Slip Way 68
Slip Way oils are intended for sliding and rolling guideways in metal-cutting machine tools and for hydraulic systems, including various special-purpose machines requiring smooth movement at low speeds.
ViscosityISO VG 68
Pack sizes20 l · 180 kg
Specifications and performance levels
DIN 51502-CGDIN 51524-2 (HLP)DIN 51517, part 3 (CLP)
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 68 |
| Kinematic viscosity at 40 °C | 61.2–74.8 mm²/s |
| Flash point | not below 200 °C |
| Pour point | no higher than -20 °C |
| Acid number | no more than 0.6 mg KOH/g |
| Ash content | no more than 0.04 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.03 % |
| Load-wear index (Iz), four-ball test | at least 304 (31) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Slip Way 220
Slip Way oils are intended for sliding and rolling guideways in metal-cutting machine tools and for hydraulic systems, including various special-purpose machines requiring smooth movement at low speeds.
ViscosityISO VG 220
Pack sizes20 l · 180 kg
Specifications and performance levels
DIN 51502-CGDIN 51524-2 (HLP)DIN 51517, part 3 (CLP)
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 220 |
| Kinematic viscosity at 40 °C | 198–242 mm²/s |
| Flash point | not below 215 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 0.6 mg KOH/g |
| Ash content | no more than 0.04 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.03 % |
| Load-wear index (Iz), four-ball test | at least 333 (34) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.