Transmission oils
Trans Force GL-5
Choose the viscosity and specification for your equipment.
Trans Force GL-5 SAE 75W-90 (synthetic)
For use in hypoid gears, manual gearboxes, power take-off units, differentials and other components of passenger cars and trucks where API GL-5 oil performance is required.
More about application
SAE 75W-140 is intended for heavily loaded gears, including final drives, drive axles, transfer cases and certain non-synchronised gearboxes. These oils are not recommended for manual gearboxes with synchronisers made of non-ferrous metals.
Specifications and performance levels
Technical properties
| SAE viscosity | 75W-90 |
| Base oil type | Synthetic |
| Kinematic viscosity at 100 °C | 13.5–18.0 mm²/s |
| Viscosity index | at least 150 |
| Flash point | not below 180 °C |
| Pour point | no higher than -40 °C |
| Acid number | no more than 2.0 mg KOH/g |
| Load-wear index (Iz), four-ball test | at least 568 (58) N (kgf) |
| Weld load (Pc) in a four-ball test | at least 3685 (376) N (kgf) |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Trans Force GL-5 SAE 75W-140
For use in hypoid gears, manual gearboxes, power take-off units, differentials and other components of passenger cars and trucks where API GL-5 oil performance is required.
More about application
SAE 75W-140 is intended for heavily loaded gears, including final drives, drive axles, transfer cases and certain non-synchronised gearboxes. These oils are not recommended for manual gearboxes with synchronisers made of non-ferrous metals.
Specifications and performance levels
Technical properties
| SAE viscosity | 75W-140 |
| Base oil type | Synthetic |
| Kinematic viscosity at 100 °C | 24.0–32.5 mm²/s |
| Viscosity index | at least 170 |
| Flash point | not below 185 °C |
| Pour point | no higher than -40 °C |
| Acid number | no more than 2.0 mg KOH/g |
| Load-wear index (Iz), four-ball test | at least 568 (58) N (kgf) |
| Weld load (Pc) in a four-ball test | at least 3685 (376) N (kgf) |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Trans Force GL-5 SAE 80W-90
Trans Force GL-5 SAE 85W-90, SAE 80W-90 are multigrade oils for hypoid gears, gearboxes, power take-offs, differentials and other assemblies in passenger cars and lorries where API GL-5 oil is required.
More about application
Trans Force GL-5 SAE 85W-140 is used in heavy-duty differentials and final drives operating continuously or for prolonged periods under high shock loads.
Specifications and performance levels
Technical properties
| SAE viscosity | 80W-90 |
| Base oil type | Mineral |
| Kinematic viscosity at 100 °C | 13.5–18.0 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 200 °C |
| Pour point | no higher than -27 °C |
| Acid number | no more than 2.0 mg KOH/g |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | minimum: not specified; determination required, N (kgf) |
| Weld load (Pc) in a four-ball test | at least 3685 (376) N (kgf) |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Trans Force GL-5 SAE 85W-90
Trans Force GL-5 SAE 85W-90, SAE 80W-90 are multigrade oils for hypoid gears, gearboxes, power take-offs, differentials and other assemblies in passenger cars and lorries where API GL-5 oil is required.
More about application
Trans Force GL-5 SAE 85W-140 is used in heavy-duty differentials and final drives operating continuously or for prolonged periods under high shock loads.
Specifications and performance levels
Technical properties
| SAE viscosity | 85W-90 |
| Kinematic viscosity at 100 °C | 16.5–18.0 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 200 °C |
| Pour point | no higher than -27 °C |
| Acid number | no more than 2.0 mg KOH/g |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 568 (58) N (kgf) |
| Weld load (Pc) in a four-ball test | at least 3685 (376) N (kgf) |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.