Transmission oils
Universal Force UTTO
Technical properties, documentation and direct purchase from Forsage.
Packaging photograph on request
Universal Force UTTO 10W-30
Intended for lubricating hydromechanical transmissions, hydraulic systems, oil-immersed (“wet”) brakes and clutches in agricultural, construction and road construction machinery requiring UTTO oils.
More about application
Provides easy starting and reliable equipment operation at ambient temperatures down to -25 °C.
Viscosity10W-30
Pack sizes205 l · 20 l
Specifications and performance levels
API GL-4John Deere JDM J20A/B/C/DMassey Ferguson CMS M1135/M1143Caterpillar TO-2CASE MS 1204/1206/1207/1209CNH MAT 3510/3525/3526
All specifications and compliance claims
Volvo WB101Kubota UDTSperry Vickers/Eaton I-280-SAllison C4John Deere J14A-CJohn Deere JTD 303John Deere J121AJohn Deere J20AJohn Deere J20BJohn Deere J20CJohn Deere J20DCNH MAT 3510CNH MAT 3525CNH MAT 3526Massey Ferguson M1135Massey Ferguson M1138Massey Ferguson M1141Massey Ferguson M1143Massey Ferguson V1145Volvo WB101 (VCE97303)Parker (Denison UTTO)HF-1 to HF-2Flat Hesston AF-87Ford FNHA-2-C-200Ford C201Ford M2CA-CFORD M2C-41FORD M2C-43FORD M2C-48BFORD M2C-48CFORD M2C-53AFORD M2C-53BFORD M2C-77AFORD M2C-86AFORD M2C-86BFORD M2C-86CFORD M2C-92AFORD M2C-142AFORD M2C-143FORD M2C-159AIHC B-2 International HarvesterJ.I Case/Case Int: MS-1204J.I Case/Case Int: MS-1206J.I Case/Case Int: MS-1207J.I Case/Case Int: MS-1209JIC 143-145 International FarmallRenk Doromat n87.3.874ARenk Doromat n87.3.874BSteiger HTF (SEMS 17001)White Q-1826JCMAS HKP-041JCMAS HKP-042Sauer Sunstrand/DanfossGL-4J.I Case/Case Int MS-1204J.I Case/Case Int MS-1206J.I Case/Case Int MS-1207J.I Case/Case Int MS-1209J.I Case/Case Int: MS-1204, 6, 7, 9JCMAS HKP-041, 042Parker (Denison UTTO) HF-1Parker (Denison UTTO) HF-2Renk Doromat n87.3.874A/BFord ESN-M2C134-D/ESN-M2C86-BNH 410B/420ADIN 51524, part 3 (HVLP)
Technical properties
| SAE viscosity | 10W-30 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 11.5–12.5 mm²/s |
| Viscosity index | at least 120 |
| Flash point | 200 °C |
| Open-cup flash point | not below 200 °C |
| Pour point | no higher than -37 °C |
| Base number | at least 7.5 mg KOH/g |
| Mechanical impurities by mass | no more than 0.01 % |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.