Scania R380: two consecutive cycles
Original laboratory reports and customer documents are provided in Russian.
Two laboratory results for Diesel Force Ultra HD 10W-40 after use in a Scania R380.
- Company
- Orlova, sole trader · Tver
- Equipment
- Scania R380
What the studies showed
31 000 / 44 000 kmOperating mileage in two test reports
Both test reports note a slight reduction in viscosity. The other parameters were assessed as within normal limits; monitoring of trends and repeat testing were recommended.
Conditions and methodology
In-service sampling and testing at MITs GSM. Conditions, methods and specific samples are detailed in the original documents.
The results relate to the specified samples and equipment. Operating mileage or hours in an individual trial do not constitute a recommended drain interval for other machines. Follow the equipment manufacturer's instructions and all comments in the test reports.
Documents and analysis results
Original PDFs are available to view and download. The meaning of the laboratory's comments has been retained.
Test report No. 850088 · 03.12.2024
Test report No. 902727 · 25.04.2025
Laboratory observations for each test report
Test report No. 850088 · 03.12.2024
Oil viscosity is slightly reduced. The other oil parameters are within normal limits. Monitor changes in viscosity during continued use. Repeat testing after a short period of operation is recommended.
Test report No. 902727 · 25.04.2025
Oil viscosity is slightly reduced. The other oil parameters are within normal limits. Monitor changes in viscosity during continued use. Repeat testing after a short period of operation is recommended.
Products in this article