Stalnoy Lev: experience with Forsage
Feedback on using two Forsage products and working with the manufacturer.
Conditions and resultsSupporting documents · 1
Letter from the customer Stalnoy Lev
Commercial vehicles
Diesel Force Premium HD
Choose the viscosity and specification for your equipment.
Packaging photograph on request
Diesel Force Premium HD SAE 5W-40
Intended for heavily loaded engines in mining trucks, road construction machinery, long-haul and other vehicles, as well as industrial engines.
More about application
Suitable for mixed vehicle fleets. Compatible with exhaust gas recirculation (EGR) systems — not suitable for use with diesel particulate filters (DPF).
Viscosity5W-40
Pack sizes20 l
Specifications and performance levels
API CI-4/SLACEA E7MB 228.3MAN M 3275Volvo VDS-3Cummins CES 20076
All specifications and compliance claims
Cummins CES 20077Cummins CES 20078Renault RLD-2Mack EO-NDeutz DQC-III-10MTU Category 2Caterpillar ECF-2Global DHD-1KAMAZ PJSCAvtodizel PJSC (YaMZ)LiAZ LLCTutaev Motor Plant OJSCAPI* CI-4/SLCI-4Cummins CES 20076/77/78E7SL
Technical properties
| SAE viscosity | 5W-40 |
| Base oil type | Synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 155 |
| Flash point | not below 215 °C |
| Open-cup flash point | 215 °C |
| Pour point | no higher than -37 °C |
| Base number | at least 9.0 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.015 % |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Diesel Force Premium HD SAE 10W-40
Intended for heavily loaded engines in mining trucks, road construction machinery, long-haul and other vehicles, as well as industrial engines.
More about application
Suitable for mixed vehicle fleets. Compatible with exhaust gas recirculation (EGR) systems — not suitable for use with diesel particulate filters (DPF).
Viscosity10W-40
Pack sizes5 l · 20 l · 205 l
Specifications and performance levels
API CI-4/SLACEA E7MB 228.3MAN M 3275Volvo VDS-3Cummins CES 20076
All specifications and compliance claims
Cummins CES 20077Cummins CES 20078Renault RLD-2Mack EO-NDeutz DQC-III-10MTU Category 2Caterpillar ECF-2Global DHD-1KAMAZ PJSCAvtodizel PJSC (YaMZ)LiAZ LLCTutaev Motor Plant OJSCAPI* CI-4/SLCI-4Cummins CES 20076/77/78E7SL
Technical properties
| SAE viscosity | 10W-40 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 140 |
| Flash point | not below 215 °C |
| Open-cup flash point | 215 °C |
| Pour point | no higher than -35 °C |
| Base number | at least 9.0 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.015 % |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Diesel Force Premium HD SAE 15W-40
Intended for heavily loaded engines in mining trucks, road construction machinery, long-haul and other vehicles, as well as industrial engines.
More about application
Suitable for mixed vehicle fleets. Compatible with exhaust gas recirculation (EGR) systems — not suitable for use with diesel particulate filters (DPF).
Viscosity15W-40
Pack sizes205 l · 20 l
Specifications and performance levels
API CI-4/SLACEA E7MB 228.3MAN M 3275Volvo VDS-3Cummins CES 20076
All specifications and compliance claims
Cummins CES 20077Cummins CES 20078Renault RLD-2Mack EO-NDeutz DQC-III-10MTU Category 2Caterpillar ECF-2Global DHD-1KAMAZ PJSCAvtodizel PJSC (YaMZ)LiAZ LLCTutaev Motor Plant OJSCAPI* CI-4/SLCI-4Cummins CES 20076/77/78E7SL
Technical properties
| SAE viscosity | 15W-40 |
| Base oil type | Mineral |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 125 |
| Flash point | not below 215 °C |
| Open-cup flash point | 215 °C |
| Pour point | no higher than -25 °C |
| Base number | at least 9.0 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Water content by mass | traces only |
| Mechanical impurities by mass | no more than 0.015 % |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.