Commercial vehicles

Diesel Force Ultra DPF

Technical properties, documentation and direct purchase from Forsage.

Intended for diesel engines in long-haul, road construction and other machinery, as well as buses.

More about application

Compatible with exhaust gas recirculation (EGR), diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems. May be used in gas engines running on compressed natural gas, CNG (methane).

Viscosity10W-40

Pack sizes20 l · 205 l

Buy in the online shop Full product page

Testing and experience in service

Specifications and performance levels

API CI-4API CI-4/SLCI-4CI-4/SLSLACEA E6

All specifications and compliance claims

ACEA E7MB 228.51MAN M 3477Volvo VDS-3Cummins CES 20078Renault RLD-2Mack EO-NDeutz DQC-IVMTU Category 3.1Scania LA

Technical properties

SAE viscosity	10W-40
Base oil type	Synthetic
Kinematic viscosity at 100 °C	12.5–16.3 mm²/s
Viscosity index	at least 130
Flash point	not below 210 °C
Pour point	no higher than -30 °C
Base number	at least 8.0 mg KOH/g
Sulphated ash	no more than 1.0 %
Water content by mass	traces only
Mechanical impurities by mass	no more than 0.015 %
Foaming tendency / foam stability	no more than 10/0, 20/0, 10/0 cm³

Documents for the selected variant

Technical data sheetDownload ↓

Testing and experience in service

Articles relating to this specific product: operating conditions, results and original documents.

Laboratory quality controlSeptember 2025 — April 2026

DAF 105.460: two monitoring cycles

Monitoring Diesel Force Ultra DPF 10W-40 in a DAF tractor unit: a fresh sample and analyses after operation.

Conditions and results

Supporting documents · 3

Trial report

Download PDF ↓

Test report No. 845599 · 09.09.2025

Download PDF ↓

Test report No. 845616 · 20.04.2026

Download PDF ↓

Laboratory observations for each test report

Test report No. 845599 · 09.09.2025

The measured parameters are typical of the stated oil type. For a more precise assessment and interpretation of the results, comparative tests are needed using a product of the same name and guaranteed quality, or the full list of requirements for the lubricant or its quality certificate.

Test report No. 845616 · 20.04.2026

Oxidation is elevated. The other oil parameters are within normal limits. Monitor changes in oxidation during continued use. Repeat testing after a short period of operation is recommended.

Compare with another oil ↗

Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.

Search the website

Diesel Force Ultra DPF

Specifications and performance levels

Documents for the selected variant

Testing and experience in service

DAF 105.460: two monitoring cycles

Test report No. 845599 · 09.09.2025

Test report No. 845616 · 20.04.2026

Document

Privacy settings

Diesel Force Ultra DPF