Passenger vehicles
Motor Force Premium
Choose the viscosity and specification for your equipment.
Motor Force Premium SAE 5W-30
A viscosity modifier resistant to thermal degradation helps the oil maintain its specified viscosity characteristics as temperature and loads change.
More about application
This helps maintain a stable oil film and reliable engine operation throughout the oil’s service life.
Specifications and performance levels
Technical properties
| SAE viscosity | 5W-30 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 9.3–12.5 mm²/s |
| Viscosity index | at least 135 |
| Flash point | not below 200 °C |
| Pour point | no higher than -35 °C |
| Base number | at least 6.5 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Mechanical impurities by mass | 0,015 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Motor Force Premium SAE 5W-40
A viscosity modifier resistant to thermal degradation helps the oil maintain its specified viscosity characteristics as temperature and loads change.
More about application
This helps maintain a stable oil film and reliable engine operation throughout the oil’s service life.
Specifications and performance levels
Technical properties
| SAE viscosity | 5W-40 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 140 |
| Flash point | not below 200 °C |
| Pour point | no higher than -35 °C |
| Base number | at least 6.5 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Mechanical impurities by mass | 0,015 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Motor Force Premium SAE 10W-40
A viscosity modifier resistant to thermal degradation helps the oil maintain its specified viscosity characteristics as temperature and loads change.
More about application
This helps maintain a stable oil film and reliable engine operation throughout the oil’s service life.
Specifications and performance levels
Technical properties
| SAE viscosity | 10W-40 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 130 |
| Flash point | not below 200 °C |
| Pour point | no higher than -30 °C |
| Base number | at least 6.5 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Mechanical impurities by mass | 0,015 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Motor Force Premium SAE 15W-40
A viscosity modifier resistant to thermal degradation helps the oil maintain its specified viscosity characteristics as temperature and loads change.
More about application
This helps maintain a stable oil film and reliable engine operation throughout the oil’s service life.
Specifications and performance levels
Technical properties
| SAE viscosity | 15W-40 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 120 |
| Flash point | not below 205 °C |
| Pour point | no higher than -30 °C |
| Base number | at least 6.5 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.