Photograph on request
Motor Force Premium SAE 10W-40
A viscosity modifier resistant to thermal degradation helps the oil maintain its specified viscosity characteristics as temperature and loads change.
More about application
This helps maintain a stable oil film and reliable engine operation throughout the oil’s service life.
10W-401 l4 l20 l205 l5 l
SKU: FL-MOTOR-FORCE-PREMIUM-10W-40-1L
Technical properties
| SAE viscosity | 10W-40 |
| Base oil type | Semi-synthetic |
| Kinematic viscosity at 100 °C | 12.5–16.3 mm²/s |
| Viscosity index | at least 130 |
| Flash point | not below 200 °C |
| Pour point | no higher than -30 °C |
| Base number | at least 6.5 mg KOH/g |
| Sulphated ash | no more than 1.5 % |
| Mechanical impurities by mass | 0,015 % |
| Foaming tendency / foam stability | no more than 10/0, 50/0, 10/0 cm³ |
Specifications and performance levels
API SL/CFAvtoVAZ PJSCVW 501.01/505.00CFSL
Compliance information is based on manufacturer data. When selecting a product, consider the equipment manufacturer's requirements.
Documentation
Technical data sheet
Technical data sheet
SKUs and pack sizes
| 1 l | FL-MOTOR-FORCE-PREMIUM-10W-40-1L |
| 4 l | FL-MOTOR-FORCE-PREMIUM-10W-40-4L |
| 20 l | FL-MOTOR-FORCE-PREMIUM-10W-40-20L |
| 205 l | FORSAGE-MOTOR-FORCE-PREMIUM-SAE-10W-40-205L |
| 5 l | FORSAGE-MOTOR-FORCE-PREMIUM-SAE-10W-40-5L |
Information checked on 30 October 2026 · View in online shop ↗
