Industrial oils
Reductor CLP
Choose the viscosity and specification for your equipment.
Reductor CLP 68
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 68 |
| Kinematic viscosity at 40 °C | 61–75 mm²/s |
| Flash point | not below 190 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 441 (45) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 30 min |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Reductor CLP 100
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 100 |
| Kinematic viscosity at 40 °C | 90–110 mm²/s |
| Flash point | not below 200 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 441 (45) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 30 min |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Reductor CLP 150
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 150 |
| Kinematic viscosity at 40 °C | 135–165 mm²/s |
| Flash point | not below 210 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 490 (50) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 30 min |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Reductor CLP 220
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 220 |
| Kinematic viscosity at 40 °C | 198–242 mm²/s |
| Flash point | not below 210 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 490 (50) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 30 min |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Reductor CLP 320
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 320 |
| Kinematic viscosity at 40 °C | 288–352 mm²/s |
| Flash point | not below 210 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 490 (50) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 30 min |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Reductor CLP 460
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
Specifications and performance levels
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 460 |
| Kinematic viscosity at 40 °C | 414–506 mm²/s |
| Flash point | not below 210 °C |
| Pour point | no higher than -10 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 540 (55) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 45 min |
Documents for the selected variant
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.