Photograph on request
Reductor CLP 150
Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.
ISO VG 15020 l180 kg
SKU: FL-REDUCTOR-CLP-ISO-VG-150-20L
Technical properties
| Base oil type | Mineral |
| ISO VG viscosity grade | ISO VG 150 |
| Kinematic viscosity at 40 °C | 135–165 mm²/s |
| Flash point | not below 210 °C |
| Pour point | no higher than -15 °C |
| Acid number | no more than 1.0 mg KOH/g |
| Water content by mass | traces only |
| Mechanical impurities by mass | absent, % |
| Load-wear index (Iz), four-ball test | at least 490 (50) N (kgf) |
| Wear scar diameter (Di) under an axial load of 392 N (40 kgf) | no more than 0.55 mm |
| Demulsibility: emulsion separation at 82 °C | no more than 30 min |
Specifications and performance levels
DIN 51517, part 3 (CLP)DIN 51517 part III (CLP)
Compliance information is based on manufacturer data. When selecting a product, consider the equipment manufacturer's requirements.
Documentation
Technical data sheet
Technical data sheet
SKUs and pack sizes
| 20 l | FL-REDUCTOR-CLP-ISO-VG-150-20L |
| 180 kg | FORSAGE-REDUCTOR-CLP-150-180KG |
Information checked on 30 October 2026 · View in online shop ↗
