Transmission oils
Trans Force GL-4/5
Choose the viscosity and specification for your equipment.
Packaging photograph on request
Trans Force GL-4/5 SAE 75W-90
These oils are intended for gearboxes and hypoid axles in passenger cars and commercial vehicles operating at elevated temperatures.
Viscosity75W-90
Pack sizes175 kg · 180 kg · 1 l · 20 l · 4 l
Specifications and performance levels
API GL-4API GL-5API GL-4/5GL-4GL-4/5GL-5
Technical properties
| SAE viscosity | 75W-90 |
| Base oil type | Synthetic |
| Kinematic viscosity at 100 °C | 13.5–18.5 mm²/s |
| Viscosity index | at least 140 |
| Flash point | not below 180 °C |
| Pour point | no higher than -40 °C |
| Acid number | no more than 2.0 mg KOH/g |
| Load-wear index (Iz), four-ball test | at least 568 (58) N (kgf) |
| Weld load (Pc) in a four-ball test | at least 3685 (376) N (kgf) |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.
Trans Force GL-4/5 SAE 80W-90
These oils are intended for gearboxes and hypoid axles in passenger cars and commercial vehicles operating at elevated temperatures.
Viscosity80W-90
Pack sizes20 l · 180 kg
Specifications and performance levels
API GL-4API GL-5API GL-4/5GL-4GL-4/5GL-5
Technical properties
| SAE viscosity | 80W-90 |
| Base oil type | Mineral |
| Kinematic viscosity at 100 °C | 13.5–18.5 mm²/s |
| Viscosity index | at least 90 |
| Flash point | not below 200 °C |
| Pour point | no higher than -27 °C |
| Acid number | no more than 1.5 mg KOH/g |
| Load-wear index (Iz), four-ball test | at least 568 (58) N (kgf) |
| Weld load (Pc) in a four-ball test | at least 3685 (376) N (kgf) |
Documents for the selected variant
Technical data sheetDownload ↓
Specifications are based on manufacturer data. Check the equipment manufacturer’s requirements before selecting a product.