Forsage Lubricants
Forsage Lubricants
+7 (4742) 35-35-66

Search the website

Motor Force Platinum SAE 5W-40

Forsage Lubricants Motor Force Platinum SAE 5W-40

A series of fully synthetic engine oils with an advanced functional additive package for modern passenger cars with petrol and diesel engines manufactured after 2010, and for light commercial vehicles, including turbocharged models.

More about application

The oils are developed with the requirements of leading equipment manufacturers in mind. They are made from highly refined synthetic base oils using advanced additive packages.

5W-401 l4 l20 l205 l

SKU: FL-MOTOR-FORCE-PLATINUM-5W-40-1L

Tests and documents for this product

Technical properties

SAE viscosity5W-40
Base oil typeSynthetic
Kinematic viscosity at 100 °C12.5–16.3 mm²/s
Viscosity indexat least 160
Flash pointnot below 220 °C
Open-cup flash point220 °C
Pour pointno higher than -35 °C
Base numberat least 8.5 mg KOH/g
Sulphated ashno more than 1.5 %
Foaming tendency / foam stabilityno more than 10/0, 50/0, 10/0 cm³

Specifications and performance levels

API SN/CFACEA A3/B3ACEA A3/B4Mercedes-Benz 229.5VW 502.00/505.00BMW LL-01
All specifications and compliance claims
Renault RN 0700/0710GM LL-A/B-025PSA B71 2294Fiat 9.55535-N2AvtoVAZ PJSCA3/B3A3/B4ACEA A3/B3, A3/B4CFGM-LL-A-025GM LL-B-025Renault RN0700Renault RN0710SNSN / CFVolkswagen 502 00VW 505 00

Compliance information is based on manufacturer data. When selecting a product, consider the equipment manufacturer's requirements.

Documentation

Technical data sheet
Technical data sheet
Compare with another oil ↗

Testing and experience in service

Articles relating to this specific product: operating conditions, results and original documents.

Laboratory quality controlAugust–October 2023

VAZ-2110: fresh and used oil samples

Two Motor Force Platinum 5W-40 samples: fresh oil and used oil.

Conditions and results
Supporting documents · 2
Test report No. 686384 · 03.10.2023
Test report No. 686385 · 04.10.2023
Laboratory observations for each test report

Test report No. 686384 · 03.10.2023

The reported parameters are typical of the stated oil type. More accurate interpretation of the results requires comparison with the same product of guaranteed quality or with the requirements for the lubricant. Comprehensive testing under the OilGarant® service is recommended to check compliance with the stated API/ACEA/AAI specifications.

Test report No. 686385 · 04.10.2023

Silicon content is critically elevated. This may be due to leaks in the air intake system, a faulty air filter or external contamination. Oil viscosity is slightly reduced. The other oil parameters are within normal limits. An oil change is recommended. Check the air intake system for leaks and replace the air filter.

Document

Original source document; the file itself has not been translated.

Loading PDF…Open file ↗

Loading document…

SKUs and pack sizes
1 lFL-MOTOR-FORCE-PLATINUM-5W-40-1L
4 lFL-MOTOR-FORCE-PLATINUM-5W-40-4L
20 lFL-MOTOR-FORCE-PLATINUM-5W-40-20L
205 lFORSAGE-MOTOR-FORCE-PLATINUM-SAE-5W-40-205L

Information checked on 30 October 2026 · View in online shop ↗

Privacy settings

Videos are enabled separately. All other sections are available whichever option you choose.

Necessary dataAlways active

Website protection and saving your choice. No advertising or analytics.

Cookie policy · Personal data