Forsage Lubricants
Shop Get in touch
Forsage Lubricants
+7 (4742) 35-35-66

Search the website

Reductor Synt 220

Forsage Lubricants Reductor Synt 220
Full Reductor Synt range ↗
460ISO VG 68ISO VG 150ISO VG 220ISO VG 320

Intended for lubricating industrial gears operating under medium and high loads, including shock loads; circulation systems in various mechanisms operating under increased loads; friction components in automatic hot-forging presses; and other heavily loaded industrial equipment components.

More about application

Can also be used at sub-zero temperatures.

ISO VG 22020 l175 kg
Buy in the online shopProduct advice

SKU: FL-REDUCTOR-SYNT-ISO-VG-220-20L

Tests and documents for this product

Technical properties

Base oil typeSynthetic
ISO VG viscosity gradeISO VG 220
Kinematic viscosity at 40 °C198–242 mm²/s
Viscosity indexnot below 160
Flash pointnot below 240 °C
Pour pointno higher than -35 °C
Acid number1.0 mg KOH/g
Water content by masstraces only
Mechanical impurities by massabsent, %
Load-wear index (Iz), four-ball testat least 490 (50) N (kgf)
Wear scar diameter (Di) under an axial load of 392 N (40 kgf)no more than 0.55 mm

Specifications and performance levels

DIN 51517, part 3 (CLP)DIN 51517 part III (CLP)

Compliance information is based on manufacturer data. When selecting a product, consider the equipment manufacturer's requirements.

Documentation

Technical data sheet
Download PDF ↓
Compare with another oil ↗

Testing and experience in service

Articles relating to this specific product: operating conditions, results and original documents.

Laboratory quality controlMay–September 2023

Sandvik CH660: gearbox oil

Testing fresh gear oil and samples taken after use in industrial equipment.

Conditions and results
Supporting documents · 3
Test report No. 639797 · 23.05.2023
Download PDF ↓
Test report No. 671672 · 02.08.2023
Download PDF ↓
Test report No. 684300 · 03.10.2023
Download PDF ↓
Laboratory observations for each test report

Test report No. 639797 · 23.05.2023

The reported oil parameters are within normal limits.

Test report No. 671672 · 02.08.2023

Copper content is elevated. The other oil parameters are within normal limits. During further operation, monitor the trend in copper accumulation. Repeat oil testing after a short period of operation.

Test report No. 684300 · 03.10.2023

Lead content is elevated. The other oil parameters are within normal limits. During further operation, monitor the trend in lead accumulation. Repeat oil testing after a short period of operation.

Document

Original source document; the file itself has not been translated.

Loading PDF…Open file ↗

Loading document…

SKUs and pack sizes
20 lFL-REDUCTOR-SYNT-ISO-VG-220-20L
175 kgFORSAGE-REDUCTOR-SYNT-220-175KG

Information checked on 30 October 2026 · View in online shop ↗

IN THIS CATEGORY

Privacy settings

Videos are enabled separately. All other sections are available whichever option you choose.

Necessary dataAlways active

Website protection and saving your choice. No advertising or analytics.

Cookie policy · Personal data